| 10-016 |
Pulley : Motor Drive |
| 10-067 |
Bumper : Foot - Assembly |
| 10-092 |
Switch : Safety - Right Side
|
| 10-117 |
Drum : Glass |
| 10-130 |
Motor : Drive |
| 10-132 |
Bearing : Drive |
| 10-134 |
Bearing : Thrust |
| 10-146 |
Switch : On-Off |
| 10-149 |
Cord : Fan |
| 10-161 |
Fan (110v) |
| 10-165 |
Insulator : Right Safety
Switch |
| 10-172 |
Connector : Socket |
| 10-173 |
Connector : Plug (obs) |
| 10-174 |
Contact : Socket (obs) |
| 10-175 |
Contact : Pin |
| 13-067 |
Motor Control PCB Assembly
|
| 14-038 |
Mount : Wiring |
| 18-105 |
Support: Lamp End |
| 18-110 |
Roller: Belt - Rear |
| 18-115 |
Nut : Drive Shaft |
| 18-120 |
Shaft : Idler |
| 18-122 |
Shaft: Tension - Upper |
| 18-125 |
Roller: Forward |
| 18-135 |
Roller: Drive Assembly |
| 18-140 |
Shaft: Tracking |
| 18-145 |
Roller: Tracking |
| 18-150 |
Plate: Motor Mount |
| 18-160 |
Support |
| 18-170 |
Plate: Drive |
| 18-180 |
Plate : Right Side |
| 18-190 |
Plate : Left Side |
| 18-200 |
Reflector |
| 18-210 |
Bracket : Lamp Socket |
| 18-220 |
Base |
| 18-230 |
Cover: Right |
| 18-240 |
Cover: Left |
| 18-250 |
Tray : Front |
| 18-255 |
Bracket : Terminal Strip |
| 18-260 |
Guide: Upper |
| 18-270 |
Guide: Lower |
| 18-280 |
Bezel: Lower |
| 18-290 |
Bezel: Upper |
| 18-300 |
Bezel: Entry - Standard |
| 18-301 |
Bezel: Entry - Wide 4.7" |
| 18-310 |
Plenum: Side |
| 18-320 |
Plenum: Rear |
| 18-501 |
PCB : Assembly - Sensor |
| 18-503 |
Belt : Drive Motor |
| 18-504 |
Handle : Pocket |
| 18-505 |
Socket : Exposure Lamp |
| 18-506 |
Socket : 9-pin Connector (obs)
|
| 18-507 |
Plug : 9-pin Connector (obs)
|
| 18-508 |
Switch : Safety - Left Side
|
| 18-509 |
Circuit Breaker : 10amp |
| 18-510 |
Lamp : Exposure (400 watt)
|
| 18-511 |
Capacitor : 30 mfd |
| 18-512 |
Bracket : Capacitor |
| 18-513 |
Cover : Capacitor Terminal
|
| 18-514 |
Belt : Transport - 2 3/16"w x
27 3/8"L |
| 18-515 |
Line Cord (14awg) |
| 18-516 |
Ballast w/o Capacitor |
| 18-517 |
Spring : Extension |
| 18-518 |
Grommet : Motor Mount - Left
Side |
| 18-519 |
Grommet : Motor Mount - Right
Side |
| 18-520 |
Bearing : Flange |
| 18-521 |
Bearing : Sleeve Idler |
| 18-522 |
Blade : Film Pick Off |
| 18-523 |
Power Receptacle - AC |
| 18-524 |
Lamp : Ready |
| 18-525 |
Terminal Strip : 8-position
|
| 18-526 |
Cover : Terminal Strip -
8-position |
| 18-527 |
Bumper : Foot - Upper |
| 18-528 |
Bumper : Foot - Lower |
| 18-529 |
Thermostat : Safety |
| 18-532 |
Gasket : Black Sponge - 3 feet
x 1/8" |
| 18-533 |
Knob : Exposure Speed |
| 18-534 |
Gasket : Black Sponge - 3 feet
x 1/16" |
| 18-535 |
Wiring Harness : # 1 |
| 18-536 |
Wiring Harness : # 2 |
| 18-537 |
Wiring Harness : # 3 |
| 18-538 |
Belt : Transport (Vert
Jackets) |
| 18-600 |
Screw - Shoulder : 3/8 x 3/8
|
| 18-601 |
Screw - Shoulder : 1/2 x 1
|
| 18-602 |
Retaining Ring : 1/2" shaft
|
| 18-603 |
Screw : PFHMS 6-32 x 3/8" |
| 18-604 |
Screw : Cap - 1/4-20 x 2" |
| 18-605 |
Screw : Socket Hd - 1/4-20 x
1/2 |
| 18-606 |
Screw : FHSMS - 10-32 X 3/8
|
| 18-607 |
Screw : FHSMS - 8-32 X 3/8
|
| 18-608 |
Screw : PHMS - 10-32 x 2 1/2
|
| 18-609 |
Screw : PHMS - 6-32 x 1 |
| 18-610 |
Screw : PHMS - 4-40 x 3/4 |
| 18-611 |
Standoff : 1" x 1/4" - 10-32
|
| 18-612 |
Washer : Idler Lock |
| 18-613 |
Washer : Lock 1/4 |
| 18-614 |
Washer : Flat - 1/4 |
| 18-615 |
Washer : Flat # 8 |
| 18-616 |
Washer : Lock # 8 |
| 18-617 |
Washer : Lock # 4 |
| 18-618 |
Washer : Flat # 4 |
| 18-619 |
Washer : Flat # 10 |
| 18-620 |
Washer : Lock # 10 |
| 18-621 |
Washer : Lock # 6 |
| 18-622 |
Washer : Flat # 6 |
| 18-623 |
Nut : Hex - 1/4-20 |
| 18-624 |
Nut : Hex - 10-32 |
| 18-625 |
Nut : Hex - # 6 |
| 18-626 |
Nut : Hex - # 8 |
| 18-627 |
Spacer : 1/2 OD x 1/4 ID x 1/4
H |
| 18-628 |
Nut : Knurled 10-32 |
| 18-629 |
Spacer : 3/8" x 3/8" - # 10
screw |
| 18-630 |
Screw : PHMS - 8-32 x 2 |
| 18-631 |
Standoff : 6-32 x 1 x 1/4 OD
|
| 18-632 |
Standoff : 6-32 x 3/8 x 1/4 OD
|
| 18-633 |
Standoff : 6-32 x 1/2 x 1/4 OD
|
| 18-634 |
Standoff : 4-40 x 3/8 x 3/16
OD |
| 18-635 |
Screw : PHMS 4-40 x 5/16 |
| 18-636 |
Boot : Safety Interlock Cover
|
| 18-637 |
Jumper : Terminal Block |
| 18-638 |
Screw : PHMS - 6-32 x 3/4 |
| 18-639 |
Washer : Shim |
| 18-640 |
Nut : Wire - Orange |
| 18-670 |
Manual : Installation &
Operations - M-2 |
| 18-671 |
Box : Carboard - packing - M-2
|
| 18-672 |
Pallet : Wood |
| 18-673 |
Pad : Packaging - Ends |
| 18-674 |
Pad : Packaging - Front & Back
|
| 18-675 |
Pad : Packaging - Top & Bottom
|
| 18-676 |
Pad : Packaging - Filler |
| 18-677 |
Edge Protector |
| 18-678 |
Label : Serial Number |
| 18-679 |
Label : CMI - US Flag |
